FR01EXP01

Programming engine designed to work inside fixture with experiment board

Overview

FlashRunner FR01EXP01 is a member of the FlashRunner series of a high-performance, standalone In-System Programmers specific for Flash-based microcontrollers and serial memories.
FlashRunner FR01EXP01 is targeted at production environments and can work either in full standalone mode or controlled by a host system.

Features

  • Fast programming algorithms developed to reach the memory technology speed limit of the target device.
  • Standalone operations (projects and code images stored on a memory card);
  • Easy ATE integration;
  • Based on FlashRunner FR01ENG engine;
  • Controllable by any host system via RS-232;
  • Supports most ISP protocols (BDM, JTAG, SPI, I2C, MON, ICC, SCI, etc.);
  • Flexible, fully configurable;
  • Compact and robust design for production environments.
  • Data integrity guaranteed (every data transfer to/from the host system or Secure Digital card is CRC tagged).

Hardware Features

  • 9 to 24V power supply input;
  • Five digital I/O lines;
  • Two digital I/O or analog output lines;
  • Two programmable output voltages (0 to 15V, 0.25A and 0 to 5V, 0.5A);
  • One analog input line;
  • One programmable clock output;
  • Secure Digital memory card (up to 2 GB);
  • 512 bytes on-board dynamic memory;
  • On-board timekeeper and calendar;
  • I/O protection;
  • Optoisolated inputs for project selection;
  • Two optoisolated command inputs (START and STOP);
  • Three optoisolated status outputs (FAIL, PASS, BUSY);
  • One optoisolated RS-232 channel;
  • Experiment board.

FlashRunner FR01EXP01 features state-of-the-art electronics to provide you with high integration flexibility in a compact footprint.

FlashRunner’s open architecture makes its firmware easily upgradable to support both new devices and new features.

Software Features

FlashRunner FR01EXP01 is set up and controlled via ASCII-based commands.

  • Fully autonomous standalone mode thanks to its SD memory card (FAT16);
  • Controllable by any host system through a terminal utility and simple ASCII protocol;
  • Up to 32 hardware-selectable projects (scripts), unlimited software-selectable projects;
  • Log files;
  • Erase, blank check, program, read, verify, oscillator trimming, etc.

FlashRunner FR01EXP01 comes with a Windows utility that allows you to communicate with the instrument and perform the most common operations: send commands, manage SD card files, update the instrument’s firmware, etc.